This small colour CCD camera with integral lighting allows inspection through less than 30mm diameter holes. The camera is mounted on the end of a lightweight sectional pole extendable from one to five metres as standard with additional sections available as an option if required. The system can be broken into lengths of 0.8 metres for ease of transport and storage.
The standard camera head can be replaced with a colour zoom option if required.
The user friendly hand held control unit allows the operator to vary the tilt speed, angle and LED brightness. The controller is also compatible with the OE18-100 Telescopic Rotate & Tilt Camera, which allows inspection through an 83mm diameter hole, allowing a cost effective dual purpose viewing system to be purchased.
Standard Technical Features
Electrical:
Image Resolution
330 TV Lines
Minimum Illumination
0.5 Lux @ f/2.0
Sensor
1/4" CCD
Video Output
1.0V p-p
Signal to Noise
48dB
Light Source
6 white LEDs
Light Range
3 metres
Power
12V dc/ 150mA
Power Supply
Mains adaptor supplied
Electro-Magnetic Compatibility
EN50081-1 Emission/ EN50082-1 Immunity
Environmental:
Temperature
Operating -20°C to +40°C Storage -20°C to +60°C
Vibration
10g, 20-150Hz 3-axes (non-operating)
Shock
30g peak, 25ms half-sine pulse
Camera Depth Rating
5 metres
Rating
IP67 Splash Proof
Optical:
Standard Lens
3.6mm, f/2.0
Angle of View
66.5° diagonal
Shutter
1/50 to 1/100,000 sec.
Focus
Fixed Focus
Mechnical:
Size
26.2mm diameter
Sectional Poles
5 metres in 0.8 metre lengths (additional sections can be added to the standard length)
Weight
Total Weight: 2.4kg Camera Head: 200g Standard Pole: 5 x 350g Manipulator Pole: 440g
Standard Housing
Aluminium alloy HE30T6
External Finish
Anodised
Port
Acrylic
Options
Camera Zoom Colour Camera (Diameter 60mm) Additional Lighting Anodised Poles Manipulator Accessory giving full hemispherical vision Flat Screen Monitor
Hand Held Controller:
Dimensions
175mm (H) x 275mm (L) x 75mm (D) (excl. handles and connectors)
